BioEnable’s Multispectral Fingerprint Scanner supports several modes of operation. This self-contained intelligent device performs all biometric functions and processing inside the sensor and provides on board template storage for both search and verification functions. It performs image processing, image output, feature extraction,biometric template generation, 1:1 matching or verification, 1:N matching or identification, and a pass/fail result.






Benefits – Multi-spectral Fingerprint Reader

  • The industry’s best fingerprint images
  • The industries best biometric matching performance for any person in any environment
  • Standard liveness detection to insure only genuine fingers can be matched
  • Increased throughput and user convenience: one touch failure to enroll (FTE) and failure to acquire (FTA) errors are eliminated
  • Multiple integration options to enable rapid integration in a wide variety of legacy and new applications.

Features – Multi-spectral Fingerprint Reader

  • Images surface and subsurface fingerprint features using patented multispectral imaging technology
  • High-contrast 500 dpi images
  • Multiple communication interfaces supported: USB 2.0, RS-232
  • ANSI 381 images and ANSI 378 / MINEX-certified biometric templates
  • Local verification (1:1) functions with template storage for up to 50,000 users
  • Local identification (1:N) capacity up to 1,000 users per bank and up to 10 banks for a total of 10,000 users.
  • Small, ready-to-integrate form factor for easy mechanical integration
  • Operates across wide ranges of temperature, relative humidity, and ambient light
  • High durability glass platen with no coatings that wear out.

Technical Specification – Multi-spectral Fingerprint Reader

Specification Description
Imaging system
Technology Patented optical multispectral imaging
Image resolution 500 dpi
Image bit depth 8bit, 256 grayscale
Imaging area 17.4 x 13.9 mm (rectangular)
Biometric functions
Image out ANSI 381 compliant
Template out ANSI 378 compliant
Score or verification (1:1) Requires ANSI 378 template input
Identification (1:N) Uses ANSI 378 template as an input
Template storage Up to 50,000 in verification mode
Liveness detection Standard
Latent protection Included
Biometric performance
Image capture 150 ms (typical)
Finger placement to image 1.3 sec. (typical)
Finger placement to template or score 1.8 sec. (typical)
Finger placement to identification 2.0 sec (typical) — 1,000 users.
Temperature (operating) 0 to 60°C
Humidity 0–95% RH non-condensing
ESD Immunity IEC 61000-4-2 Level 4+/-15 kV Air
Interface & Power supply requirements
USB 2.0 480 Mbps high-speed
Supply current — operational +5 VDC 400mA (peak)
Supply current — idle +5 VDC 200mA (typical)
Standards compliance
Interoperability ANSI 378, ISO 19794-2:2005, ANSI 381,
ISO 19794-4:2005, NFIQ compliant,
MINEX-certified algorithm
Device certifications CE, CSA
Operating systems Microsoft ® Windows CE / XP / 7; Linux

SDK – Multi-spectral Fingerprint Reader

SDK Versions:
Following versions of the SDK are currently available:

  • Image Capture – Yes
  • Image Match – Yes
  • Save Capture Data – Yes
  • Image Capture – Yes
  • 1:N Verification – Yes
  • ISO Image Conversion – Yes
  • NFIQ Quality – Yes

Supporting Software – Multi-spectral Fingerprint Reader

This device is supported by Following Software:
1.Fingerprint Authentication System (BioDESK-Pro):
Allows end users to kick start using this scanner for desktop based attendance.
2. Smartsuite :
Web based Attendance system with inbuilt payroll. 

  Submit Inquiry