Fingerprint sensors, OEM standalone fingerprint module, Fingerprint chip, Fingerprint IC, Fingerprint circuit, Fingerprint controller, Fingerprint PCB, Fingerprint Printed circuit board, Fingerprint SBC, Fingerprint single board computer, microcontroller, microprocessor, Biometric Fingerprint modules, Biometrics OEM standalone fingerprint module

Home Company Products Service Technologies Home Contact Us Language Country News Support Partners Shop Search Requirements
Biometrics ChipSilicon M2M Wirelessintegrated GPSintegrated Aerotag
 

 :: FIM10


FIM10-LV (Fingerprint Identification Module) is an evolutionary standalone fingerprint recognition module consisted of optic sensor and processing board. Its voltage is so low(3.3V) enough to implement a series of 23,000 authentication consuming 4 piece of AA batteries and executes average 1.2 seconds of high speed authentication. As CPU and highly upgraded algorithm are embedded into a module, it provides high recognition ratio even to small-size, wet, dry, calloused fingerprint.

Due to technologies of simple and robust hardware design and including keypad function of the existed DK in one board, it can be executed to develop viable applications and perform user enrollment and authentication needed for fingerprint recognition without a connection to PC.

  • Built-in fingerprint authentication .

  • Various authentication using 1:1/1:N matching and Password.

  • Convenient DK without a connection to PC.

  • Accurate authentication ratio even to small-size/wet/dry fingerprint.

  • Fast acquisition of difficult finger types under virtually any condition.

  • Economical due to low voltage consumption.

  • Door Lock System

  • Safe Box

  • Simple Access Controller

  • Vehicle Control

  • ATM, POS, and etc.

 

 
Item FIM10
Board Spec. ARM9, 8MB SDRAM, 1M Flash
Dimension 43X63[mm]
Fingerprint Sensor OPP02MM1(Optic)
Supply Voltage 3.3 0.1[V]
Current Consumption 60(idle)~200(Op.)[mA]
Usage Circumstances Temperature -20~60[oC]
Humidity RH 95[%]
Capture Speed 0.4(Normal)/0.7(Secure) [sec]
Boot Up Time <0.4[sec]
Authentication Time 1.2[sec] (Capture+Extract+Match)-Average
Rate FRR:0.1%, FAR:0.001%
Method 1:1, 1:N, Password
User No. 100 (2 templates per 1 person)
External Interface RS232(1 channel): 9600~115200[BPS]
In(3): Enrollment, deletion, Authentication
Out(2): Pass, Fail
Data Encryption Method AES
 

 
   
Top

 

 

We Supply: OEM standalone fingerprint module, Fingerprint chip, Fingerprint IC, Fingerprint circuit, Fingerprint controller, Fingerprint PCB, Fingerprint Printed circuit board
Send Your Requirements

Your e-mail

Requirements
 

Home Company Products Services Technologies News Support Partners Shop Search Biometrics Chipsilicon M2M WI GPSI Aerotag Contact Language Country

 
Sitemap Privacy Policy Terms & Conditions ©BioEnable Technologies Pvt. Ltd. 2007